| Aug. | 1973 | CP PROCESSING CO., LTD. is established on August 20th, at 329 Mine, Kawaguchi City, Saitama. |
| Sept. | 1973 | Operations begin on September 1st, with a capital of 4.5 million yen. |
| May | 1975 | Fukushima Factory is established. |
| Jan. | 1978 | The Head Office and the Head Factory is moved to 172 Mine, Kawaguchi City, Saitama. |
| Jan. | 1978 | Head Factory site is expanded to 3,300 ㎡. |
| Nov. | 1985 | A surface rewinder (width: 2,300 mm) is installed at the Head Factory. |
| June | 1986 | A synchro-fly cutter (width: 1,300 mm) is installed at the Head Factory. |
| Oct. | 1986 | Automatic roll wrapping machine is newly installed at the Head Factory. |
| Oct. | 1986 | A surface rewinder (width: 2,600 mm) is installed at the Fukushima Factory. |
| Mar. | 1988 | A spot detector is newly installed in the synchro-fly cutter at the Head Factory. |
| Apr. | 1988 | Dust collector (ultrasonic wave web cleaner) is newly installed in the sheet cutter No. 3 at the Head Factory. |
| Apr. | 1988 | Capital increased to 10 million yen. |
| July | 1990 | CP PROCESSING(M)SDN.BHD. established. |
| Sept. | 1990 | A surface rewinder (width: 2,600 mm) is installed at the Head Factory. |
| Jan. | 1993 | A Strachan Henshaw sheet cutter (width: 1,400 mm) is installed at the Head Factory. |
| July | 1993 | Soka Factory established. |
| July | 1993 | LENOX (width: 1,800 mm) is installed at the Soka Factory. |
| Aug. | 1993 | A MK-I sheet cutter (width: 1,400 mm) is installed at the Soka Factory. |
| Aug. | 1994 | A MK-II sheet cutter (width: 1,400 mm) is installed at the Soka Factory. |
| Sept. | 1994 | Caser (automatic case packer) is newly installed in LENOX at the Soka Factory. |
| Aug. | 1995 | A MK-II2 sheet cutter (width: 1,400 mm) is newly installed at the Soka Factory. |
| Nov. | 1996 | Fukushima Factory No. 2 established. |
| Dec. | 1996 | PM05-0 type press machine (inner piling system) is installed at the Fukushima Factory. |
| Jan. | 1997 | A guillotine (width: 1,320 mm) is installed at the Soka Factory. |
| Jan. | 1997 | A spot detector is newly installed in the sheet cutter No. 2 at the Head Factory. |
| Mar. | 1997 | A center drive bobbin (width: 1,320 mm) is installed at the Fukushima Factory. |
| Apr. | 1997 | A surface rewinder (width: 2,200 mm) is newly installed at the Fukushima Factory. |
| Nov. | 1997 | A surface rewinder (width: 2,100 mm) is installed at the Soka Factory. |
| Apr. | 1998 | A press machine (punch system) is installed at the Fukushima Factory. |
| Mar | 2001 | Fukushima Shinobudai Factory established. |
| Apr. | 2001 | Our group company, FJ Company Co., Ltd established. |
| Nov. | 2001 | A surface rewinder (width: 5,200 mm) and a center drive bobbin (width: 1,600mm) is newly installed at the Fukushima Shinobudai Factory. |
| Apr. | 2002 | A fabric cleaning factory is jointly established with Baldwin Japan Ltd. |
| June | 2002 | A surface rewinder (width: 2,200 mm) is newly installed at the Fukushima Shinobudai Factory. |
| Oct. | 2002 | Party celebrating the 30th year anniversary of CP PROCESSING is held at Tsuchiyu Onsen, Fukushima. |
| Apr. | 2003 | Laminated packaging film and heat seal manual work at the Fukushima Shinobudai Factory begin. |
| Sept. | 2004 | The cut position accuracy (plus-minus 0.2 mm) of the RC No. 4 mark cutting system is adjusted at the Head Factory. |
| July | 2005 | The Head Factory No. 2 is established and operation began, and 5 micro-slitters are newly installed. |
| Sept. | 2007 | LENOX with 5 hooks stand is transferred from the Soka Factory to the CP PROCESSING(M)SDN.BHD., and installed there. |
| May | 2008 | A double-shaft slitter (width: 1,300 mm) is installed at the Fukushima Shinobudai Factory. |
| Jan. | 2009 | The double-shaft turret type sheet cutter stencil paper board stand No. 1 (2 tons one side) is newly installed at the Head Factory. |
| Mar. | 2010 | Sheet cutter No. 1 subsurface detector is installed and updated at the Head Factory. |
| Apr. | 2010 | A double-shaft slitter (width: 1,300 mm) is purchased and temporally installed at the Fukushima Factory No. 1. |
| June | 2010 | Detector is transfered from the sheet cutter No. 2 to the sheet cutter No. 4 and installed at the Head Factory. |
| June | 2010 | A detector is newly installed at the rewinder No. 4 at the Head Factory. |
| Sept. | 2010 | A surface rewinder (width: 2,300 mm) is installed at the Fukushima Shinobudai Factory. |
| Sept. | 2010 | A guillotine (width: 1,306 mm) is installed at the Fukushima Factory. |
| Feb. | 2011 | A surface rewinder (width: 1,700 mm) is installed at the Fukushima Factory, and another one is temporarily installed at the Fukushima Shinobudai Factory. |
| Apr. | 2012 | A MK II sheet cutter, a detector, and a cutter-rotor direct drive control device is newly installed at the Soka Factory. |
| Oct. | 2012 | The MK II sheet cutter semi-synchro is switched with a push-type synchro-cutter and is newly installed at the Soka Factory. |
| Dec. | 2012 | A double-shaft slitter (width: 1,300 mm) is transferred from the Fukushima Shinobudai Factory to the Fukushima Factory No. 2, and is installed. |
